HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 46

Страница: 46 / 84

12.

Peg Belt (Optional):

An optional Peg Belt can be installed behind the

Ellis cleaning table and rod conveyor to remove

vines, stolen and other debris. The vines and sto-

len get caught in the pegs and are removed from

the flow of material.

Use the brackets on the left side of the frame to

adjust its angle to remove more vines as the pota-

toes pass. Monitor how many vines remain in the

flow and adjust as required.

13.

Blower (Optional):

If the machine is equipped with an optional peg

belt for removing vines and stolen, it will also be

equipped with a blower to blow the light vines into

the peg belt for removal. The angle of air flow can

be changed to provide the best results as required.

Monitor the cleanliness of the potatoes and adjust

the peg belt and blower angles appropriately to

give the best results.

NOTE

Change blower speed by adjusting the

VFD (Variable Frequency Drive) inside

the control box.

FIG. 22 PEG BELT / BLOWER

Peg Belt - Right Rear

Blower Angle - Left Side

Variable Frequency Drive (VFD)

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 46 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: