HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 42

Страница: 42 / 84

4.8 OPERATING

Follow this procedure when using the Clod Hopper:

1. Review Section 4.7 - Machine Set-Up and be sure

all auxiliary conveyors and equipment are posi-

tioned appropriately for the application.

2. Review and follow the pre-operation checklist

(See Section 4.5).

3. Review the location and function of all controls

(See Section 4.6).

4. Position the truck to unload and move the pota-

toes into the input hopper and primary elevator.

• Read and understand this Operator’s Manual be

fore operating, maintaining, adjusting, or repairing.

• Stop machine, disconnect power lines, and wait for

all moving parts to stop before servicing, adjusting,

maintaining, repairing, or cleaning.

• If removed for servicing, install and properly secure

all guards and shields before operating.

• Keep hands, feet, hair, and clothing away from all

moving parts.

• Clear the area of bystanders, especially small

children, before starting.

• Using the jacks, raise the machine until the weight

is off the tires; then level the frame. If the machine’s

weight remains on the tires, the tires must be

chocked to prevent movement.

• Have a certified electrician provide electrical power

to the machine.

• Disconnect power lines or shut off power source

before opening panel or working on electrical com-

ponents. High voltage can cause electrocution.

• Do not stand between the hopper and any vehicle

backing up to the hopper. Keep others away.

• Keep the working area clean and dry.

• Review safety instructions annually.

• Make certain that you are in compliance with local,

state/provincial , and federal regulations regard-

ing transporting agricultural equipment on public

roadways.

OPERATING SAFETY

• Make certain that all wheels and tires are in good

repair and that tires are inflated to proper pressure.

Do not under-inflate or overinflate.

• Make certain that all wheel lug bolts are tightened

to proper torque specifications.

• Install the transport cylinder locks on the input

conveyor and secure.

• Add extra lights and use pilot vehicle(s) when

transporting during times of limited visibility.

• Wrap up and bind all electrical wires to the frame.

• Be sure that any necessary SMV (slow moving

vehicle) signs, reflectors, and lights required by

law are in proper place and are clearly visible to

all traffic.

• Be sure the tow vehicle has adequate capacity and

weight to safely tow the Clod Hopper.

• Be sure to positively hitch to the towing vehicle. Use

a retainer on the pin and a safety chain to assure

a safe hitch hook-up when transporting.

• Adhere to local regulations regarding maximum

weight, width, and length.

• Do not exceed 20 MPH (32 kph). Reduce speed

on rough roads and surfaces.

• Do not allow anyone to ride on the Clod Hopper or

towing vehicle during transport.

• Always use hazard flashers on the towing vehicle

when transporting.

FIG. 15 UNLOADING

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 42 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: