Revision A • 6/06
H
A
R
R
I
S
C
O
R
P
O
R
A T
I
O
N
2-11
2 Installation
PGM 1, PGM 2, PGM 3 and PGM 4 digital out-
puts. When set to off, the sample rate is 44.1 kHz.
When set to on, the sample rate is 48 kHz.
DS2-3 selects the signal used for the local PGM
4 analog connector. When set to off, PGM 4 is
output. When set to on, Telco Record is output
instead. This setting does not affect the digital PGM
4 output or the PGM 4 VistaMax system signal.
DS2-4 is set to on when a Quad Meter Package
is installed. For the standard two meter display it
must be set to off.
DS2-5 and DS2-6 set which source feeds the
External 1 and 2 monitor selectors. When set to
off, the local external audio input is used. When
set to on, the signal is routed from a VistaMax
system. The on setting should only be used when
the Link Activation kit has been installed.
NETWAVE CONTROL PANELS
The NetWave’s main components are identified
in the illustration, above. There are four types of
control panels (Dual Fader, Dual Router, Monitor
and Dual Blank); two types of cards (Monitor &
Output and DSP & I/O); and two display PCAs
(Dual Meter and Clock-Timer).
Each
slot
, or control panel frame position, is
1.6" wide. The Monitor panel consumes three slots
while all of the other panels use two slots. There
are sixteen input slots on a NetWave-16, as shown
above, so up to eight Dual Fader or Dual Router
panels can be installed. The NetWave-16, as
shipped from the factory, includes six Dual Fader
panels installed into slots 1-12. Slots 13-16 are
covered by two Dual Blank panels.
Additional Dual Fader panels (99-1423) can be
installed into slots 13-16 at time of installation or
N O
N O
N O
N O
N OT E S :
T E S :
T E S :
T E S :
T E S :
The console model (NetWave-8, -16,
-24) equals the number of input slots. One Monitor &
Output card and one Monitor Control panel is supplied
with each frame. Each DSP & I/O card has DSP, audio
inputs and logic I/O for eight input channels, thus
NetWave-8 has one DSP card, NetWave-16 has two DSP
cards, and NetWave-24 has three DSP cards.
Unpopulated input slots are covered by NetWave Dual
Blank panels (90-2125).
User-installed NetWave console options:
• 99-1423 Dual Fader Panels (two additional panels
can be added to NetWave-16, three to NetWave-24)
• 99-1424 Dual Router Kit (adds VistaMax system
source selection to any Dual Fader panel)
• 99-1425 Link Activation Kit (adds a bidirectional
console connection to a VistaMax or Envoy Hub card)
• 99-1990-16Q Quad Meter Package for NetWave-16
• 99-1990-24Q Quad Meter Package for NetWave-24
NetWave-16
, Frame Configuration
99-1422 N
e
tW
a
v
e
M
onito
r
C
o
ntro
l
P
a
nel
(one standar
d
)
with Aux Met
e
r,
Co
nt
rol Ro
om and
S
tu
d
io Monitor C
o
nt
ro
ls
Input Slot 1
Input Slot 2
Input Slot 3
Input Slot 4
Input Slot 5
Input Slot 6
Input Slot 7
Input Slot 8
Input Slot 9
Input Slot 10
Input Slot 11
Input Slot 12
Input Slot 13
Input Slot 14
Input Slot 15
Input Slot 16
99-1420 DSP & I/O card *
PRE99-1423 NetWave Dual Fader
panels take up two input slots.
Unused input slots are covered
with PRE90-2125 Dual Blanks.
99-1421
Reflective Console Display
Cue Speaker PGM 1 Meter AUX Meter Clock and Timer
99-1420 DSP & I/O card *
