Harris NetWave, Руководство по эксплуатации и техническому обслуживанию

Страница: 50 / 90

Revision A • 6/06
H A R R I S C O R P O R A T I O N
3-4
3 Using NetWave
CHANNEL DISPLAY
S S S S S our our our our ourc cc cce N e N e N e N e Name D ame D ame D ame D ame Displa ispla ispla ispla isplay — y — y — y — y — The two ten-character displays have two
functions, depending upon whether the Next Next Next Next Next label is lit. When Next Next Next Next Next is
not lit, the display shows the name of the network source routed to the
channel. Pressing the Up or Down button causes Next
Next Next Next Next to light and
changes the display to show the names of a potential next source for that
channel.
N N N N Ne e e e ex x x x x t — t — t — t — t — When lit, indicates the source selector buttons (Up and Down)
are actively being used to find the next source for the channel. Next Next Next Next Next is
turned off when Take is pressed. If Take is not pressed, then it turns off
about three seconds after the last Up or Down button press and the name
returns to showing the currently routed network source name.
Include A Include A Include A Include A Include All — ll — ll — ll — ll — Press the Up and Down buttons together to activate
the Include All function, which allows every source name available to
the console to be displayed (typically each channel only has small list of
source names, in a channel-specific include list, to make selecting a
next source easier). To return to the channel-specific include list, press
the Up and Down buttons together again to turn off Include All
Include All Include All Include All Include All.
SOURCE SELECTION CONTROLS
UP and DWN — UP and DWN — UP and DWN — UP and DWN — UP and DWN — Pressing either button lights the Next Next Next Next Next label. This
changes the Source Name Display to show the names of potential next
sources while the Next
Next Next Next Next label is lit. Press the Up button to step through the
names in forward alphanumeric order. Press the Down button (DWN)
to step through the names in reverse order. Pressing and holding either
button rapidly steps through the list. The Source Name Display returns
to show the current source name about three seconds after the last button
press. Pressing both Up and Down toggles the Include All function on
(Include All
Include All Include All Include All Include All is lit), or off (Include All Include All Include All Include All Include All is not lit).
T T T T TAKE — AKE — AKE — AKE — AKE — When Next Next Next Next Next is lit, and the channel is off, pressing Take selects
the displayed next source as the new source for the channel. To prevent
on-air signal interruptions, the current source cannot be changed while
the channel is on. If the Take button is pressed while the channel is on,
the on button blinks rapidly to indicate the take command is locked
out. After the channel is turned off, the Take button can be pressed to
take the previously selected next source.
DUAL ROUTER PANEL
Dual Router panels are recognized by their 10-character Source Name displays and Next and Include All labels
in the channel display. These panels are only available on Linked consoles networked with a VistaMax system.
Most panel functions are identical to the Dual Fader panel, so only those functions that differ are covered here.
SOURCE
SELECTION
CONTROLS
CHANNEL
DISPLAY