Hardi ISOBUS VT, Руководство оператора

Страница: 27 / 104

3 - Description
3.15
Menus
Full menu structure
÷
NOTE! Blank fields are menus without name or description.
÷
NOTE! Menus marked with a are not for ISOBUS terminals.
Menu number Menu name Description / Help text
1 Daily settings Most used settings e.g. desired rate, tank contents and register number
1. 1 Volume rate Use arrow keys or numeric keys to set the desired volume rate
1. 2 Tank contents To change displayed tank contents. Use arrow keys or numeric keys to set
1. 3 Select register Use register 1 to 99 for job. Scroll to register, then press Enter to show data
1. 3. 1
1. 3. 1. 1 Show register spray data 1 Press C for 5 sec to reset register. Enter to see screen 2, ESC to leave
1. 3. 1. 1. 1 Start date
1. 3. 1. 1. 2 Start time
1. 3. 1. 1. 3 End date
1. 3. 1. 1. 4 End time
1. 3. 1. 2 Show register spray data 2 Press C for 5 sec to reset register, Enter to see screen 1, ESC to leave
1. 3. 1. 2. 1 Volume applied
1. 3. 1. 2. 2 Area covered
1. 3. 1. 2. 3 Average spray speed
1. 3. 1. 2. 4 Maximum spray speed
1. 3. 1. 2. 5 Travelled spray dist
1. 3. 1. 2. 6 Time used spraying
1. 3. 1. 2. 7 Work rate
1. 3. 1. 2. 8 Average volume rate
1. 4 Volume rate: Preset high Rate selected with1 press on the arrow up-key
1. 5 Volume rate: Preset low Rate selected with1 press on the arrow down-key
2 Setup Customizing of display, automatic functions, clock, alarms, registers, etc
2. 1 Display readout Customizes the 4 small display readouts
2. 1. 1 Show upper middle
2. 1. 1. 01 Programmed volume rate Shows Programmed volume rate
2. 1. 1. 02 Boom flow Boom flow rate per minute sprayed out through the boom
2. 1. 1. 03 time Actual time
2. 1. 1. 04 Work rate Rate shown in hectare per hour or acre per hour
2. 1. 1. 05 Actual volume rate Actual rate in liter per hectare or gallon per acre
2. 1. 1. 06 Tank contents Main tank contents
2. 1. 1. 07 Speed Driving speed
2. 1. 1. 08 Volume sprayed Readouts for Volume sprayed in currently active register
2. 1. 1. 09 Area sprayed Readouts for Area sprayed in currently active register
2. 1. 1. 10 Active boom size Active boom size including end nozzle
2. 1. 1. 11 Pressure Displays spray pressure if sensor is fitted
2. 1. 1. 12 Fan speed Displays Twin fan speed if sensor is fitted
2. 1. 1. 13 Wind Speed Displays wind speed if sensor is fitted
2. 1. 1. 14 Pendulum lock status Displays reading of pendulum lock sensor if fitted
2. 1. 1. 15 Pendulum unlock status Displays reading of pendulum unlock sensor if fitted
2. 1. 1. 16 Dynamic center position Displays Dynamic center position sensor if fitted
2. 1. 1. 17 Spray pump rev Displays revolutions if sensor is fitted
2. 1. 1. 18 Extra sensor 1F Readout from extra sensor 1 frequency
2. 1. 1. 19 Extra sensor 2F Readout from extra sensor 2 frequency
2. 1. 1. 20 Extra sensor 3A Readout from extra sensor 3 analog
2. 1. 1. 21 Extra sensor 4A Readout from extra sensor 4 analog
2. 1. 1. 22 Voltmeter Displays system voltage. Useful when fault finding
2. 1. 1. 23 Agitation Agitation valve opening
grey box