Hardi ISOBUS VT, Руководство оператора

Страница: 72 / 104

8 - Menu 4 Toolbox
8.2
Menu 4.5 Test
All readouts for the transducers are in accumulated counts, i.e. one signal gives one count, except for the optional (analog)
transducer that is read in milliampere.
1.
Go to menu [4.5 Test].
2.
Choose the item to be tested and open the menu.
3.
Activate sensor and see if the signal is detected.
Menu 4.6 Speed simulation
Speed may be simulated for certain purposes. A two figure value may be
entered. The state remains valid until the Controller is restarting or the
value is set to “0”.
Menu Help text
4.5.1 Flow Speed Optional sensors Activate function to monitor sensor (e.g. drive forwards, start flow).
4.5.2 Active keys Push key to see if a count is registered. If yes, the key or switch function is OK.
4.5.3 PrimeFlow test PrimeFlow test for nozzles and PrimeFlow computers on boom. Not for ISOBUS
4.5.4 Input test See computer readings of sensors. Frequency, switch, analog inputs.
4.5.5 Valve test Self test.
4.5.6 PrimeFlow SMCU status See nozzle position, nozzle order, counts of data error power error.
4.5.6 PrimeFlow motor status See nozzle motor status.