HappyJapan HCS3, Инструкция

Страница: 69 / 364

-S3 -59
7-8
CAP FRAME (OPTION)
7_8 U701
Adjusting
Cap grip Hook
Hook
Cap stretcher
Loosen
(Thick fabric)
Tighten
(Thin fabric)
W ide cap frame
Adjustment
When you fix cap to cap hold frame, please
adjust in the following manner.
Make sure to do the adjustment of the cap
hold frame. If it is not adjusted properly, it
may cause the deformity, damage of the
cap, damage of the cap hold frame and
break of the cap grip.
After adjusting the cap hold frame, make
sure the cap to be set properly.
1. Adjust the length of the cap grip to
suit the thickness of the fabric. At this
moment, hook should open and close
without feeling heavy.
(For the adjustment follow the next page
“ H ooping caps” item 1 to 5.)
The adjustment to be done by two
adjusting screws. (Fig. 1)
If the cap grip is loose, even after
hooked the cap is not fixed tightly and
the cap is moving. (Fig. 2)
If the cap grip is too tight, you feel heavy
when it is hooked and the grip bites into
the cap too much. (Fig. 3)
If you feel hook extremely heavy in opening
and closing, there is a case that cap hold
frame will lose its shape or damaged.
2. Adjust the guide position to suit the
height of the cap.
Remove screws at left and right to
adjust. (Fig. 4)
Fig. 4
Fig. 2
Fig. 3
Fig. 1
Guide Screw Cap drive frame
High Low