HappyJapan HCS3, Инструкция

Страница: 97 / 364

-DE -121
9-D
REGISTER
17_1 Q501
Register will restore the position of the frame to the last point before a power failure even if the
point of origin or the pattern itself were changed.
If register is used with a cap drive frame, make sure that the machine recognizes it by
showing “Cap” (Cap frame) or “OnePoint” (One Point frame) the appropriate frame or the
machine could be damaged.
If register is used with indication of frames that do not require cap drive frame, carriage
moves and exceeds embroidery area of cap drive frame and damages the machine and cap
drive frame.
When you use “REGISTER”, keep clear of the frame and table. It is dangerous as the frame
could make sudden movements.
Never use register with the needle bar and presser foot lowered, as they could hit the cap
drive frame and break.
It is not always necessary to set “Entry”, but you can’t set “Return”. Once “Entry” is set, it is
retained even if power is turned off.
If you change the position of the original point, set it again.
Even if you set “Entry”, the frame may not return exactly to the original position in process of
time.
Reset this monthly.
Entry
Registering the start point in the selected pattern.
Return (Registered position)
When position of the frame changes because of power loss, this will restore the frame to the
registered point.
Selected frame