HappyJapan HCS3, Инструкция

Страница: 22 / 364

-S3 -30
3_9 U901
3-
DRIVE MODE
Drive key
The each key menu will be shown.
Frame forward
This creates direct designations to the position and
data to the designated sewing position.
Piece
If “Repeat” is set, this allows the frame to move to
the beginning of any piece at will.
Change (Color position )
This moves the frame to the beginning of any Color
change number at will beginning of color.
Stitch (Number of stitches )
This moves the frame to any stitch at will.
Frame forward
Needle bar
selection
Drive speed
Needle change
Frame move
i-Custom
(default display)
Pressure foot
Drive speed
Control embroidery speed.
The speed can be controlled while embroidering.
Speed control
Press the + button to increase the machine sewing
speed and the - button to lower the machine speed.
is displayed on the LCD display.
Low speed operation (OFF state)
Press the button to turn “ON” state.
Low speed operation (ON state)
The drive speed will be reduced to “200 rpm”.
Press the button to turn “OFF” state.
Speed setting by needle (OFF state)
Press the button to turn “ON” state. 3-9d
Speed setting by needle (ON state)
Press the button to turn “OFF” stat
e. 3-9d
Needle bar selection 5-E
For each color change in a given pattern, the needle number loaded with the correct color thread is as-
signed by the operator.
Color position forward
Move the frame to the beginning embroidery posi-
tion of the previous or later color position number
Stitch number forward
Move the frame forward or backward by the stitch
number displayed in each button.
Menu
Display menu
mode. 3-A
Powe off
Turn off the machine.
5-1c