HappyJapan HCS3, Инструкция

Страница: 7 / 364

-S3 -5
SETTING UP THE MACHINE
2_1 UB01
2-1
CAUTION: To prevent accidents.
The machine is quite heavy for one person to carry.
Please use two persons when unpacking or carrying.
CAUTION: To avoid problems.
Make sure to hold bottom of the machine body when
removing from the box.
Do not hold any other place. (bed, moving head,
control box etc.).
We recommend unpacking should be done where it has enough room.
Remove the machine from box
1. Remove 2 straps from the carton.
2. Lift the box (upper) to remove.
3. Take out the accessories.
Refer to the next page.
4. Take out the styrene foam (right) and (left)
in the direction of the arrow.
5. Take out the styrene foam (lower front), (lower
right), and (lower left).
Be careful not fall down the machine, tilt the
machine slightly when taking out the styrene form
(lower right) and (lower left).
6. Carry the machine to installation location.
Please keep those packing materials in case
of necessary for repair or other reasons.
Packing procedure is the reverse from
unpacking procedure.
Straps
Box (upper)
Styrene foam
Styrene foam
Styrene foam
How to carry machine
The unpacked machine should be carried by 2 person with the hand position at shown in
photos.
Right side
Left side
The person
holding the
machine from
right side need
to hold the
machine arm by
left hand.
Styrene
Styrene
Right hand
Left hand
Left hand
Right side