HappyJapan HCS3, Инструкция

Страница: 123 / 364

-D2 -101
1
2
-1
NEEDLE BAR SELECTION
13_1 MA05
Needle number settings
5-E
A needle number can be assigned to a *color change number.
When the needle number is assigned, the machine will embroider and automatically switch to
the programmed for each color change number.
Color change stop function
5-F
A *color change stop can be assigned to a color change number.
When this is done, the machine embroiders the stitches for that color change number and then
stops, displaying the following message:
Auto setting
Changes all designated needle numbers at once.
Thread color
This sets the background color or color assigned to each needle bar to be shown in the display.
Color change data registration, Color change data read
You can use the color change data from a saved pattern, register it, and then export the regis-
tered data to the selected pattern for use.
Repetition of color group setting
If your design has repetition of the group of the same color sequence, only set first sequence
and set other automatically by following steps.
>>Change Stop