Happy HCS-1201-30, Руководство по обслуживанию

Страница: 163 / 204

163/204
Other - Setting of machine
5-6-5
This is to make basic setting of the machine. As we use flash memory for writing, contents are not cleared
even if clearing all memories are conducted.
If you want to change contents further, please obtain approval from manufacturers.
Contents
Head : 1 Number of heads (in case of HCS, 1 head)
Needle : 12 Number of needle
X.Angle : 48 (20 degrees - 72 degrees) Starting angle of X frame movement
Y.Angle : 48 (20 degrees - 72 degrees ) Starting angle of Y frame movement
TRD.Std : 212 (208 degrees - 228 degrees) Standard angle for thread cut
TRD.Long : 220 (220 degrees - 240 degrees) Longer angle for thread cut
Borrer : NO With or without borer
Y.area : 285 (290 degrees - 285 degrees ) Max embroidery area (Y)
1. Press “ ” button and press “ENT” button with display of Other.
2. Press “ ” button and set to item you want to set, then press “ENT” button.
3. Press “ ” button for setting value to input and press “ENT” button.
4. Setting to OK, press “ENT” button.
Display turns off for a moment, however display [Procedure 3] will come after completing re-writing.
5. You can return to previous display by pressing ”Menu” button in each case.