Happy HCS-1201-30, Руководство по обслуживанию

Страница: 183 / 204

183/204
Trouble shooting(Thread break)
7-2-2
Trouble Factor Cause of trouble and measure Page
Thread break
Environment
4
. Is there something that produce steam, wasted cotton, dust around.
the embroidery machine?
5-1 Keep the embroidery machine off those things. (2-5)
5. Does thread go out of control by taking wind from outside or heater etc.? (2-5)
6-1 Keep the embroidery machine off such wind.
6-2 Move the embroidery machine to proper place.
Pattern 1. Does thread break occur repeatedly at same place in design?
1-1 Check pattern to modify punching.
2. Is it too narrow between stitches?
2-1 Check pattern to modify punching.
2-2 Setting of [create] menu. (Stitch sweep) (5-1)
3. Too many empty stitches?
3-1 Make [create] setting. (this setting doesn't read empty stitches) (5-1)
Others 1. Using spray paste (adhesive material)
1-1 Clean around rotary hook. (10-2)
1-2 Replace or clean needle. 3-1-2
1-3 Use this paste at a given place and never use in front or back of
the embroidery machine.
( ) ----- Reference instruction book