14
MINIVATOR SIM INSTALLATION MANUAL
Figure 37
Figure 39
Figure 38
Figure 41
Figure 40
Seat base
2
Load the seat base and feed the two seat post
retaining bolts through the washers and the
seat stems into the bottom front chassis;
selecting the appropriate seat height for the
client by using the holes corresponding to the
height that is required
(Figure 37)
.
3
Tighten the seat post stabilising bolts
(Figure 38)
, and tighten the safety bolt.
4
Remove the lowest of the available central
knockouts from the top rear cover and feed
through the main pack loom
(Figure 39)
.
5
Using the clips provided
(Figure 40)
fit the
cover plate to the front chassis
(Figure 41)
.
05029 Sim Install MULTI ENG:Layout 1 17/06/2010 14:47 Page 14
