MINIVATOR SIM INSTALLATION MANUAL
15
E
N
G
L
IS
H
Figure 42
Figure 43
Figure 44
Figure 45
Seat back
Fitting the seat back
Items required:
Tools required:
• Seat back
• 6mm ball ended Allen key
Redundant connections are present to allow
easy re-handing of seats. Connections must be
made according to the handing of the stairlift;
i.e. for a stairlift with left-hand toggle switch
and key switch (always together on one side),
those connections must be made to left hand
arm. The right arm will then house a powered
footplate switch (if fitted).
1
Place the seat back onto the seat base and
using a ball ended 6mm Allen key secure it
with the four bolts and washers provided
(Figure 42)
.
2
Make the upper seat wiring connections as
follows
(Figure 43)
;
a
Key switch connection:
green and orange to green and orange.
b
Toggle switch: blue, white and brown to
blue, white and brown
ARM SWITCHED POWERED
FOOTPLATE ONLY
c
Powered footplate:
Twin Yellow to twin Yellow
3
Tidy the cables to the back of the seat
(Figure 45)
.
Note:
The toggle switch connection must be
made through the interlock loom to enable
the arm interlock functionality
(Figure 44)
.
05029 Sim Install MULTI ENG:Layout 1 17/06/2010 14:47 Page 15
