MINIVATOR SIM INSTALLATION MANUAL
5
E
N
G
L
IS
H
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
f
Bring the top copper charge strip over the
connecting strip so that the connecting strip
is sandwiched between the copper and
plastic parts, as on the bottom section
(Figure 9)
.
g
Make sure the top and bottom sections of
charge strip are as close as possible.
Note:
Ensure that the track is connected with all
faces level so that no step is present in the joint.
Pay close attention to the busbar charging strip
– this connection MUST be flush
(Figure 10)
.
Track assembly
05029 Sim Install MULTI ENG:Layout 1 17/06/2010 14:47 Page 5