30
MINIVATOR SIM INSTALLATION MANUAL
Figure 63
If anything does not function correctly further
investigation and corrective action should be
undertaken.
Maintenance
Items required:
Tools required:
• Lubricant
• None
– petroleum jelly
• Cleaning materials
1
Lubricate the rack with a small quantity of
petroleum jelly:
a
Apply a small amount of petroleum jelly at
4 equally spaced points along the track in
the rack recess
(Figure 63)
.
b
Run the lift up and down the track several
times to distribute the lubricant.
2
Lubricate the swivel mechanism with a small
quantity of petroleum jelly:
a
Remove the seat by unscrewing the
retaining bolt.
b
Apply the lubricant to the nylon washer.
c
Refit the seat and refit the retaining bolt.
3
Check all of the safety features on the lift
as described in the Testing section of the
installation manual.
4
Check that the lift still stops flush with the top
step and adjust as necessary –
see page 18
.
5
Sit on the lift and ride it up and down the stairs
several times:
a
Listen for any unusual noises.
b
Check for poor ride quality, especially across
the spliced joint.
6
Clean the track.
7
Clean the seat.
8
Clean the power pack.
Note:
Do not use an oil based lubricant such
as WD40. It will damage the lift.
Appendix 2
05029 Sim Install MULTI ENG:Layout 1 17/06/2010 14:47 Page 30
