MilkyWay
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
4: Rail systems with full room coverage - (x-y)/traverse systems / 28
4.2: Supported cross-rails
If a rail system with full room coverage is connected to a basic rail system and if the length of the cross-rail exceeds
3000 mm, it is most appropriate to support the rail with a bolt-on rail.
5000
25
25
600
600
600
176
MC6S M10x18
M10
The bolt on rail is fixed with screws placed as pictured above. Normally the holes are placed 600 mm from each
other and the maximum length of the traverse rail is 5000 mm.
1) Drill 10 mm holes with 600 mm interval according to the picture.
2) Mount the screw, nut and washer.
3) Tighten with 30 Nm.
