MilkyWay
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
3: Basic rail systems / 19
3.4: Installation of rail curves, example
All curves must be installed by means of a fixture in the midpoint (1) of the centerline. Curves of 15, 22.5, 45 or 90
degrees must have the two remaining fixtures close to the rail joint - in the curve (2) or in the straight rail (3).
Closest possible distance is 110 mm from mounting hole to rail joint.
Combinations of straight rails and rail curves can, to an advantage, be assembled on the floor and thereafter installed
as one unit. This method significantly facilitates marking out the location of fixtures. Furthermore, it allows for the
conductor rail to be inserted in full length.
1
1
2 and 3
