MilkyWay
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
6: Connecting to power supply / 43
6.5: Turntable, electrical
6.5.1: Internal wiring diagram
The print board of the turntable features built-in rectification. Therefore, polarity is not an issue for the power supply of
the board.
This chapter describes, step by step, how to adjust Turntable, electrical, 4-point (50400233) from its standard
execution into the execution which functions with the following lift units:
• 50100039 RiseBasic300M
• 50100040 RiseBasic440M
• 50100024 Reda, in-rail charging for Turntable
• 50100027 Reda, end-point charging for Turntable
1) Start by removing the self tapping screw (T10) which holds the ring cable shoe (incl. cable) and the sheet metal
plate in place (fig. 1). Leave the cable with the ring cable shoe hanging. Please note that the cable is not visible in
the illustrations in this chapter.
figure 1
