HamRadioSolutions EZMaster, Руководство пользователя

Страница: 19 / 85

EZMaster
EZMaster
User’s Guide Page 19 of 53
Configuring Your EZMaster
After connecting your EZMaster and your computer with an USB/RS232/Parallel cable, you are ready to install and start the EZMaster
Driver.
Installing the EZMaster Driver
The very first time that you will boot you PC with EZMaster connected through the USB port, the Operating System will acknowledge
that a new USB peripheral has been connected and will start to look for the disk driver. Ensure that any existing virtual Comport
software which provides COM ports via the USB connector of your computer is uninstalled from your computer BEFORE installing the
EZMaster software for the USB port virtual Com port.Then please insert the CD-ROM shipped with your EZMaster or download the latest
version from the download area on the WEB-site; if the installation procedure should ask you for the file path, click on the Browse
button and select the proper software driver path.
After a while, depending on your computer speed, EZMaster will be installed on your Computer, and a new COM port, named EZMaster,
will show up in your Control Panel-System-Device Manager, (Macintosh Operating System may differ so please refer to your OS Manual
on how to look for a new COM port).
Take a note of the number assigned to this new Virtual COM port , since it will be the port number to be used by every program (your
favorite Contest Loggerfor instance) that will have to work with EZMaster.
At this point start (double-click) the
autorun.exe program you may find in the main directory of the EZMaster CD-ROM and the
EZMaster Installer will be run.
A menu window, like the following, will show up:
Before any installation please select the
ReadMe button for the latest news.