Hamilton Beach SmartServe BIC2000, Руководство по обслуживанию

Страница: 71 / 92

Page 71 of 92
520008300 08/14
SmartServe™ Drink Mixers Service Manual
Removal and Replacement
3. Remove six screws (2) and back cover (3) from machine.
4. Disconnect water line (4) from solenoid (5).
5. Disconnect inlet water line (6) from inlet port (7).
6. Remove two nuts (8), screws (9), and solenoid support (10) from the frame.
NOTE:
Remove any wire ties as required.
2
3
2
8
10
5
9
7
6
4
7. Mark and disconnect two wires (11) from the solenoid (5).
8. Remove two screws (12) and solenoid (5) from solenoid support (10).
11
5
12
5
10
To install the water solenoid:
1. Install solenoid (5) on the solenoid support (10) with two screws (12).
2. Connect two wires (11) to the solenoid (5).
NOTE:
Replace any wire ties as required.
3. Position the solenoid support (10) on the frame and install two nuts (8) and screws (9).
4. Connect inlet water line (6) to inlet port (7).
5. Connect water line (4) to solenoid (5).
6. Install the back cover (3) with six screws (2).