Hamilton Beach SmartServe BIC2000, Руководство по обслуживанию

Страница: 74 / 92

Page 74 of 92
520008300 08/14
SmartServe™ Drink Mixers Service Manual
Removal and Replacement
Water Manifold (MIC2000 Only)
The water manifold is located near the top of the machine.
To remove the water manifold:
1. Shut off water supply, disconnect water line from machine, and purge the system to
remove water from the lines.
2. Remove the top cover as outlined in this manual.
3. Disconnect the spiral water line (1) from the manifold (2).
4. Disconnect the supply water line (3) from the manifold (2).
5. Remove two screws (4) and manifold (2) from the frame.
1
2
3
4
To install the water manifold:
1. Install manifold (2) on the frame with two screws (4).
2. Connect the spiral water line (1) to the manifold (2).
3. Connect the supply water line (3) to the manifold (2).
4. Reconnect the main water line to the machine.
5. Install the top cover as outlined in this manual.
6. Plug in the power cord to the machine, turn the control panel power switch to the
RESET position, and verify machine operates.