HAMAR LASER L-703SP, Руководство пользователя

Страница: 17 / 57

13
A-703SP-SE-A/B/C/D Target Straight-Edges and Rulers
Used with the A-703SP-LM Surface-Plate Mounting Fixture (see Figure 11 ) as a guide for the T-1297 Target to take
flatness data for each line segment. They come in the following sizes:
•
A-703SP-SE-A Target Straight-Edge and Ruler – 18 in. (457 mm)
• A-703SP-SE-B Target Straight-Edge and Ruler – 36 in. (914 mm)
• A-703SP-SE-C Target Straight-Edge and Ruler – 54 in. (1,373 mm) – 2 pieces
•
A-703SP-SE-D Target Straight-Edge and Ruler – 72 in. (1,829 mm) - 2 pieces
• A-703SP-SE-D-EXT-A 18 in. (457 mm) Target Straight-Edge Extension and Ruler for 72-90 in. (1.8-2.3 m) lengths
• A-703SP-SE-D-EXT-B 18 in. (457 mm) Target Straight-Edge Extension and Ruler for 90-108 in. (2.3-2.7 m) lengths
•
A-703SP-SE-D-EXT-C 18 in. (457 mm) Target Straight-Edge Extension and Ruler for 108-126 in. (2.7-3.2 m) lengths
For the 54 & 72-in straight edge and the add-on extensions, they must be assembles as shown in Figure 16 To assemble
the pieces:
1. Screw in the mounting screws but leave them loose.
2. Place the scale side of each straight edge length down on the plate to align the straight edge pieces and make them
straight.
3. Tighten the screws very tight to ensure the straight edge stays straight.
Figure 17 - A-703SP-SE-A/B/C/D Target Straight-Edges and Rulers
Figure 16 - A-703SP-SE-EXT-A/B Target Straight-Edge