HAMAR LASER L-703SP, Руководство пользователя

Страница: 5 / 57

1
L-703SP Surface Plate Calibration System
The L-703SP Surface Plate Calibration System has been designed to quickly and very accurately check the calibration of
surface plates using the Moody Method, following the ASME B89.3 Standard for Surface Plate Calibration. It uses
Plane6 Surface Plate Calibration Software and specially designed fixtures to give a high degree of accuracy when
calibrating surface plates.
System Components
The L-703SP Surface Plate Calibration System - includes the following components:
•
L-703S Spindle & Straightness Laser
• T-1297 3-Axis Wireless Straightness Target with .00001 in. (0.25 µm) Resolution, 10x10 PSD, Bluetooth &
Center/Scan Mode
• A-703SP-LM Surface-Plate Mounting Fixture for L-703SP Laser
• A-1297-SP High Accuracy, Flatness Measuring Base for T-1297 Target
•
A-703SP-SE-A Target Straight-Edge and Ruler – 18 in. (457 mm)
•
A-703SP-SE-B Target Straight-Edge and Ruler – 36 in. (914 mm)
•
A-703SP-SE-C Target Straight-Edge and Ruler – 54 in. (1,373 mm) – 2 pieces
•
A-703SP-SE-D Target Straight-Edge and Ruler – 72 in. (1,829 mm) - 2 pieces
• S-1409 Plane6 Surface-Plate Calibration Software for Win 7/8/10/11
• A-818 Shipping Case for L-703/L-705 Spindle & Extruder Systems
• A-819 Shipping Case for L-703SP Straight-Edges and A-703SP-LM
Computer System Requirements
•
Physical memory (RAM): 8 GB recommended
•
Processor: Intel Pentium4 or later version or AMD equivalent, 1.3 GHz minimum speed
•
Available Hard Drive space: 20 GB minimum
•
Video Resolution: 1366 x 768 minimum (32-bit color) with hardware acceleration and dedicated video memory.
• Windows 8/10/11 professional editions.
• Bluetooth 2.0 and higher
System Features
• Geometry laser, not interferometer with r esolution of 10 μin. (0.25 μm).
• Fast, easy setup – 30-40% faster than levels
• Super-linear PSD sensor with <0.25% linearity error
•
Bluetooth wireless with 100 ft. (30 m) range
•
3-point measuring base accommodates nearly any measuring increment
•
Kit includes a set of straight-edge rulers for fast setups for plates up to 72 in. diagonal. Optional add-on
straight edges are available for diagonals up to 126 in. (3.2m).
• Also includes corner & midpoint, straightedge-locating tools to position the straight edge so that the target
is located directly on the measurement line.
• Plane6 Surface Plate Calibration Software corrects setup errors and quickly records data, producing
calibration report with graph
• Plane6 software runs on most typical Windows® laptops/tablets running Win 8/10/11.
• Li-Po rechargeable batteries for laser/ target with 14+ hrs life