![Halcyon H50-01-NG Скачать руководство пользователя страница 51](http://html1.mh-extra.com/html/halcyon/h50-01-ng/h50-01-ng_installation-operation-and-owners-manual_3306278051.webp)
Halcyon
Gas Fireplace European
Home
.com
51
5. Remove the left and right burner from the burner assembly by removing the two attaching screws at the center of the burner
assembly and lifting the burners off their supports. See
Figure A3.
6. Remove the screw holding each air adjuster to the burner tube, slide each air adjuster off the burner tube, reverse the air
adjusters, slide them back on the burner tube and replace the holding screw on each air adjuster. The air inlet on each burner
tube
must not be covered.
7. Remove the left and right natural gas Burner Orifices by unscrewing them from the Center Tee. See
Figure A3.
8. Screw the left and right LP Burner Orifices into the tee and tighten securely.
9. Re-install the left and right Burners and secure them with the Attaching Screws.
10. Loosen the Pilot Burner Nut and push in the Orifice Slide to engage the LP Orifice. The red dot and “LP” marking on the Slide
will now be exposed and the “NA” marking will be hidden. Tighten the Pilot Burner Nut securely. See
Figure A4.
Appendix A - LP Gas Conversion
Burner Attaching Screws
L. Burner Tube Air Inlet
L. Burner Orifice
R. Air Adjuster Screw
R. Burner Orifice
R. Burner
L. Burner
R. Air Adjuster
(set for LP use)
R. Burner Tube Air Inlet
Burner Tube
Center Tee
Figure A3 - Burner Close-up
Figure A4 - Pilot Burner Details
Orifice Slide
Pilot Burner Nut