![Halcyon H50-01-NG Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/halcyon/h50-01-ng/h50-01-ng_installation-operation-and-owners-manual_3306278050.webp)
Halcyon
Gas Fireplace European
Home
.com
50
Appendix A - LP Gas Conversion
LP Gas Conversion Steps
1. Refer to the INSTALLATION section beginning on page 18 and, if they’re in place, remove the Glass Panel Assembly, the
interior panels, the gas supply and burner media.
2. Remove the 21 screws which fasten the burner assembly to the cabinet. Gently lift the burner assembly up about an inch and
move it to the right enough to provide an opening through which you can reach the wiring tunnel. See
Figure A1
. Take care to
avoid damaging the gasket beneath the burner assembly.
3. Separate the four-conductor plastic connector (the largest of the three connectors) by depressing the latch that holds them
together. See
Figure A2
.
4. Carefully remove the burner assembly from the cabinet and place it on a clean, sturdy work surface.
Latch
Figure A2 - Male Connector Showing Latch
Figure A1 - Halcyon Burner Moved To Right Revealing Connections