Halcyon
Gas Fireplace European
Home
.com
26
INSTALLATION
In order to ease the latching/unlatching of the glass panel assembly, the Halcyon Gas Fireplace comes equipped with a standard
5/8
” combination wrench. The wrench is used to make it easier to move the latches – your fingers can do the job just as well.
The tab on the handle of the latches is sized to accept the “box”, or closed, end of the wrench. Holding the wrench at about a 45°
angle to the latch, slip the box end of the wrench over the tab of the latch thus creating an extension of the latch. See
Figure 23.
To
remove
the glass panel assembly, refer to
Figure 23
and:
a) Unfasten Latch 2 and Latch 3 by swinging Latch 2 clockwise and Latch 3 counter-clockwise until they swing free of their
catches.
b) Unfasten Latch 1 and Latch 4 by swinging Latch 1 clockwise and Latch 4 counter-clockwise until they swing free of their
catches.
c) Using two hands, swing the bottom edge of the panel out and lift the top of the panel off its mounting rail while moving the
glass panel toward yourself.
To
install
the glass panel assembly, refer to
Figure 23
and:
a) Tilt the top of the glass panel in towards the Fireplace and hang the top lip on its mounting rail on the Fireplace ensuring that
the glass is centered on the face and the gasket does not get pinched at the top of the frame.
b) Fasten Latch 2 and Latch 3 by swinging Latch 2 counter-clockwise and Latch 3 clockwise until they engage their catches.
Fasten the two latches at the same time to ensure that the panel remains centered.
c) Fasten Latch 1 and Latch 4 by swinging Latch 1 counter-clockwise and Latch 4 clockwise until they engage their catches.
Figure 23 - Four Latches Holding the Glass Panel Assembly (shown from above)
Open
Open
Open
Open
1
4
3
2
