9 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
3.
Control functions and setting up the machine
3.1.
Arranging the machine for operation and transport
Before arranging the machine for operation and using it, ensure that the operating conditions, detailed in
Section 1.4, are met and review the safety instructions in Section 1.5.
Note! Inspect and clean the machine according to Sections 4.3 and 5.8 before arranging it for transport.
3.1.1.
Placing the in-feed conveyor in the operating or transport position
Place the in-feed conveyor in the
operating position as follows:
1.
Ensure
that
sufficient
room is available to lower
the
in-feed
conveyor
(approx. 2 m).
2.
Release the lock by
opening the latch shown
in Figure 3.
3.
Use winch A to lower the
in-feed conveyor to the
bottom position.
Figure 3.
Figure 4.