43 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
5.9.
Washing and cleaning
Any loose dirt and sawdust can be removed from the machine with pressurised air, for example. The
machine can also be washed with a high-pressure washer as long as the water jet is not aimed directly at
the bearings or electrical equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The
machine must always be cleaned after use. Clean the machine at suitable intervals and always before
storing the machine for a prolonged time. After washing, the firewood processor must be lubricated
according to the instructions in Section 6.
5.10.
Storage
Although the machine is intended for outdoor use, it should be covered and stored in a sheltered location
or indoors. Before prolonged storage, the machine must first be cleaned, then washed according to the
instructions in Section 9 and lubricated according to Section 6.
Note! The out-feed conveyor belt may shrink and tighten while in storage due to humidity. For this
reason, the out-feed conveyor must be folded into the transport position while the machine is in
storage.
