2 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
Table of contents
1.
General information .................................................................................................................... 4
1.1.
Introduction ...................................................................................................................................... 4
1.2.
Purpose of use .................................................................................................................................. 4
1.3.
Machine models and basic information ........................................................................................... 4
1.4.
Operating conditions ........................................................................................................................ 4
1.5.
Safety instructions ............................................................................................................................ 5
1.6.
Noise and vibration ........................................................................................................................... 5
1.7.
Warning symbols .............................................................................................................................. 5
2.
Receipt and assembly .................................................................................................................. 7
2.1.
Delivery inspection ........................................................................................................................... 7
2.2.
Lifting and moving the machine ....................................................................................................... 7
2.3.
Main components of the machine ................................................................................................... 8
3.
Control functions and setting up the machine............................................................................ 9
3.1.
Arranging the machine for operation and transport ........................................................................ 9
3.1.1.
Placing the in-feed conveyor in the operating or transport position ....................................... 9
3.1.2.
Placing the out-feed conveyor in the operating or transport position ................................... 11
3.2.
Controls ........................................................................................................................................... 13
3.2.1.
Tractor drive ............................................................................................................................ 15
3.2.2.
Electrical drive ......................................................................................................................... 16
3.2.3.
Adjusting the log length .......................................................................................................... 17
3.2.4.
Using the out-feed conveyor ................................................................................................... 18
3.2.5.
Splitting blade adjustment ...................................................................................................... 19
3.2.6.
Using a sawdust blower........................................................................................................... 19
4.
Operating the machine .............................................................................................................. 21
4.1.
Performing a test run on the machine ........................................................................................... 21
4.2.
Placing logs on the in-feed conveyor .............................................................................................. 22
4.3.
Feeding and sawing wood .............................................................................................................. 22
4.3.1.
Hydraulic log press .................................................................................................................. 23
4.3.2.
Jamming of the cutting blade .................................................................................................. 23
4.3.3.
Sawing the last log ................................................................................................................... 23
4.3.4.
Using the quick couplings of the additional hydraulics ........................................................... 24
4.3.5.
Connecting a log table’s in-feed rollers to the in-feed conveyor ............................................ 24
4.4.
Log splitting ..................................................................................................................................... 25
4.4.1.
Jamming of wood on the splitting blade ................................................................................. 25
4.4.2.
Resplitting or splitting without cutting ................................................................................... 25
