Clamping force tester TESTit – Connection
6.2 Measuring head
NOTE!
For using the measuring head the battery must
be sufficiently charged.
Connect the measuring head if necessary
with the included USB cable to the tablet.
Keep the connection until the battery of the
measuring head is fully charged.
6.2.1 Display
Fig. 9
Displayed at the measuring head:
charge state [A1]
NOTE!
Display [A1] at the measuring head:
An undamaged and fully charged battery has
a holding time of 4-5 hours.
After an idle time of about 15 minutes the
measuring head turns off automatically.
With a residual charge of
less than 1%
the
measuring head turns off automatically, the
measuring head must be recharged.
6.2.2 Connectors
Fig. 10
Connection of the measuring head:
USB connection [A3]
ON button [A2]
While charging the ON button [A2] flashes.
As soon as the measuring head is fully charged, the
display switches to continuous light.
Order H49 7144.907-333
21
A1
A3
A2
