Clamping force tester TESTit – Connection
6 Connection
6.1 Starting the software
1. x
To start up the software into operation, proceed as
follows:
Fig. 8
NOTE!
Check the battery holding time of the tablet.
if necessary connect the tablet with the sup-
plied cable to the electrical socket.
1. Start the tablet.
2. Wait until all the system settings are fully loaded.
NOTE!
For the data connection of the tablet to the
measuring head a bluetooth connection is
used. Depending on the design for example an
external bluetooth stick is available in the
tablet.
Make sure that in the tablet the bluetooth
stick is available, undamaged and properly
plugged is.
3. Run the TESTit application you will find pre-in-
stalled on the desktop of the tablet.
20
Order H49 7144.907-333
