– 48 –
8. With the spring of the wire clamp at the
bottom of the tub gasket (boot), insert the wire
clamp into the lip of the gasket.
9. Using pliers, pull the spring of the wire clamp,
stretching it so the rest of the wire clamp can
be inserted into the lip of the gasket.
10. Again, ensure the gasket is still seated
flat against the front panel. If not, make
necessary adjustments.
11. Reinstall the tub LED light, door glass spray
nozzle, damper and dispenser fill hose nozzle
into the gasket.
• The heater operates only when
Sanitize
or
Tub Wash
is selected.
• The control does not pause to allow the
heater to heat the wash water to the sanitize
temperature.
The heater assembly is to the front half of the
outer tub. It is accessed from the front of the
washer with the front panel removed.
Target
Temperature
Reached
Start Washing
Wash Time > 3 Min
Heater On
Heater Off
END
Yes
No
Yes
Heater Algorithm
Heater Assembly (650 and 850 Models)
(
Continued next page
)
