background image

15 YEAR LIMITED RESIDENTIAL WARRANTY

Series 96 Owner’s Manual

36

TO PLACE THE EQUIPMENT UNDER WARRANTY, THE 
WARRANTY REGISTRATION CARD MUST BE COMPLETED
AND RETURNED BY THE ORIGINAL OWNER TO HAGUE 
QUALITY WATER INTERNATIONAL WITHIN 30 DAYS OF
INSTALLATION.

Coverage

This warranty covers the Hague Maximizer® System delivered to the 
original owner when the system is purchased for personal, family, or
household use. It is intended to cover defects occurring in workmanship
or materials or both.

Warrantor's Performance and Length of Warranty

Hague Quality Water International warrants that upon receipt from the
original owner of any Hague Media Tank, Brine Tank or Valve Body
found to be defective in material or workmanship, Hague will repair or
replace the defective item, at no charge for that item, for 15 YEARS
from date of installation.

Hague Quality Water International further warrants that upon receipt
from the original owner of any other mechanical or electronic parts, and
the fine mesh polystyrene resin, which are found to be defective in 
material or workmanship, Hague will repair or replace the defective
parts, at no charge for those parts for 3 YEARS from date of 
installation; and thereafter will repair or replace the defective parts only
upon receipt of payment by the original owner of the following 
percentages of the then current list prices for the parts:

All defective parts must be returned, along with the equipment serial
number and date of original installation, to an authorized Hague dealer
or Hague Quality Water International PREPAID, and replacement parts
will be returned by Hague to the original owner FREIGHT COLLECT.

Further Exclusions and Limitations on Warranty

THERE ARE NO WARRANTIES OTHER THAN THOSE
DESCRIBED IN THIS WARRANTY INSTRUMENT.

This warranty does not cover any service call or labor costs incurred
with respect to the removal and replacement of any defective part or
parts. Hague Quality Water International will not be liable for, nor will 
it pay service call or labor charges incurred or expended with respect to
this warranty.

Years from Installation

% of list price 

to pay

3-4

50%

4-5

55%

5-6

60%

6-7

65%

7-8

70%

8-9

75%

9-10

80%

over 10

100%

In the event the water supply being processed through this product 
contains bacterial iron, algae, sulphur, tannins, organic matter, or other
unusual substances, then unless the system is represented as being 
capable of handling these substances in the system specifications, other
special treatment of the water supply must be used to remove these 
substances before they enter this product. Otherwise, Hague Quality
Water International shall have no obligations under this warranty.

This warranty does not cover damage to a part or parts of the system
from causes such as fire, accidents, freezing, or unreasonable use,
abuse, or neglect by the original owner.

This warranty does not cover damage to a part or parts of the system
resulting from improper installation. All plumbing and electrical 
connections should be made in accordance with all local codes and the
installation instructions provided with the system. The warranty does
not cover damage resulting from use with inadequate or defective
plumbing; inadequate or defective water supply or pressure; inadequate
or defective house wiring; improper voltage, electrical service, or 
electrical connections; or violation of applicable building, plumbing, or
electrical codes, laws, ordinances, or regulations.

THIS WARRANTY DOES NOT COVER INCIDENTAL, 
CONSEQUENTIAL OR SECONDARY DAMAGES.

ANY IMPLIED WARRANTIES ON THE PRODUCT DESCRIBED
IN THIS WARRANTY WILL NOT BE EFFECTIVE AFTER THE
EXPIRATION OF THIS WARRANTY.  NO DEALER, AGENT,
REPRESENTATIVE OR OTHER PERSON IS AUTHORIZED TO
EXTEND OR EXPAND THIS LIMITED WARRANTY.

Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential 
damages, so the above limitations and exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.

Claims Procedure

Any defects covered by this warranty should be promptly reported to
Hague Quality Water International at 4343 South Hamilton Road,
Groveport, Ohio 43125. In writing about the defects, please provide the
original owner's name, telephone number, and original address; serial
number and model number of the product; date of purchase; and name
of dealer from whom purchased. Hague Quality Water International
reserves the right to replace defective parts with exact duplicates or
their equivalent.

For Owner's Reference

Model No.

Equipment Serial No.

Installation Date

Installer’s Signature

Independent Dealership Name

Independent Dealership Address

Содержание 96MM









































Отзывы: