Hague Quality Water 96MM, Руководство пользователя

Страница: 14 / 40

13.00 Push the DISPLAY button to step to the next parameter. The display will show:
Salt lbs. 06.0
This parameter sets the amount of salt to be used to achieve the capacity setting.
13.00a Push the SELECT and CHANGE buttons until the desired salt setting is displayed.
In this example, set to:
Salt lbs 06.0
14.00 Push the DISPLAY button to step to the next parameter. The display will show:
Turbine Test NO
This feature should only be used by qualified service personnel. It is intended to be used for diagnostic
purposes only.
WARNING! Do not engage this feature.
14.00a Push the SELECT and CHANGE buttons until the correct value is displayed.
In this example, set to:
Turbine Test NO
15.00 Push the DISPLAY button to step to the next parameter. The display will show:
Reg. Tonight NO
This parameter, if set to YES, will force a regeneration at the next set regeneration time (i.e. 02.00.) After
the regeneration, the parameter will automatically reset to “No.”
15.00a Push the CHANGE button to toggle between Yes or No. In this example, set to:
Reg. Tonight YES
16.00 Push the DISPLAY button to step to the next parameter. The display will show:
Filter? No.
This parameter, if set to YES, is for model selection only and has no effect on the function of
the appliance. In this example, set to:
Filter, NO
.
17.00 Push the DISPLAY button to step to the next parameter. The display will show:
Gal. Remain 00979
NOTES: ______________________________________________________________________________________
Series 96 Owner’s Manual
12