Haemonetics MCS+, Руководство оператора и по техническому обслуживанию, Страница: 97 / 112

Maintenance 6-11
P/N 39551-00, Rev. F
Stand B:
1. Unplug the MCS+ device.
2. Reach through the access holes on the top shelf and grasp the filters from the
bottom of the machine.
3. Rinse each filter under warm running water until it is clean. Do not use soap
or any cleaning solution.
4. Squeeze out excess water, place on a clean cloth, and let dry overnight.
Warning! To avoid electrical shock, do not place a wet filter
into the machine.
5. Install the filters through the access holes and ensure they are properly seated
into the filter groove.
Cleaning the
Exterior
Surfaces and
User Panel
The exterior surfaces and user panel should be cleaned monthly.
1. Wipe the exterior surfaces and user panel with a lint-free cloth moistened
with water.
2. Dry with a lint-free cloth.
Cleaning the
DPM and SPM
The DPM and SPM should be cleaned daily.
1. Push white circular sleeve of the DPM with thumb as far in as possible to ex-
pose tapered aluminum luer filter adapter.
2. While pushing onto sleeve, use your other hand to wipe the exposed area of
the luer filter adapter with the alcohol pad using a circular motion (reaching
as far in as possible) to remove any residue.
3. Dry luer filter adapter with a gauze pad. (Wipe in a circular manner.)
4. Inspect luer filter adapter closely to make sure no residue remains.
5. If necessary, repeat step 2 to step 4 to remove stubborn layer(s) of residue that
is (are) still visible after initial cleaning.
6. Repeat steps 1 through 5 for the System Pressure Monitor.