Haemonetics MCS+ Скачать руководство пользователя страница 81

Страница: 81 / 112

Notice Messages and Troubleshooting

5-21

P/N 39551-00, Rev. F

419

VALVE PROBLEM

GREEN VALVE SELF TEST FAILED.

1. Toggle the valve manually.
2. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

420

SELF TEST PROBLEM

A/D CONVERTER 20% TEST FAILED.

1. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

421

SELF TEST PROBLEM

A/D CONVERTER 50% TEST FAILED.

1. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

422

SELF TEST PROBLEM

A/D CONVERTER 80% TEST FAILED.

1. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

423

SELF TEST PROBLEM

PLEASE CLAMP THE DPM LINE AND REMOVE FILTER.

During self test, the DPM and SPM filters

can not be installed.
1. Clamp tubing to the appropriate filter.
2. Remove filter from connector.
3. Resume operation.

424

SELF TEST PROBLEM

PLEASE CLAMP THE SPM LINE AND REMOVE FILTER.

During self test, the DPM and SPM filters

can not be installed.
1. Clamp tubing to the appropriate filter.
2. Remove filter from connector.
3. Resume operation.

425

SELF TEST PROBLEM

Please install the DPM Filter.

Please install the filter.
1. Attach filter.
2. Ensure that the filter is not wet.
3. Resume operation.

426

SELF TEST PROBLEM

Please install the SPM Filter.

Please install the filter.
1. Attach filter.
2. Ensure that the filter is not wet.
3. Resume operation.

427

SELF TEST PROBLEM

THE DPM CONNECTOR TEST FAILED.

The MCS+ device could not detect the pressure

monitor filter was removed.
1. Remove pressure filter from connector.
2. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

428

SELF TEST PROBLEM

THE SPM CONNECTOR TEST FAILED.

The MCS+ device could not detect the pressure

monitor filter was removed.
1. Remove pressure filter from connector.
2. Turn power OFF, then ON and try again.
NOTE: If problem persists,

call Haemonetics Technical Hot Line.

Notice Messages

Help Messages

Содержание MCS+

















































































































Результаты поиска

Содержание MCS+

Отзывы:

Похожие инструкции для MCS+

Бренды по названию

Популярные бренды

Haemonetics MCS+, Руководство оператора и по техническому обслуживанию

Результаты поиска

Содержание MCS+

Отзывы:

Похожие инструкции для MCS+

Бренды по названию

Популярные бренды