Haemonetics MCS+, Руководство оператора и по техническому обслуживанию

Страница: 82 / 112

5-22 Notice Messages and Troubleshooting
P/N 39551-00, Rev. F
429
SELF TEST PROBLEM
THE DPM IS OUT OF TOLERANCE.
The Pressure Monitor signal
is out of the allowed range.
1. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
430
SELF TEST PROBLEM
THE SPM IS OUT OF TOLERANCE.
The Pressure Monitor signal
is out of the allowed range.
1. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
431
SELF TEST PROBLEM
THE WEIGHER IS OUT OF TOLERANCE.
The Weigher signal is out of the allowed
range.
1. Remove all weight from Weigher.
2. Extend Weigher arm.
3. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
432
SELF TEST PROBLEM
THE CUFF IS OUT OF TOLERANCE.
The Cuff pressure is out of the allowed
range.
1. Check cuff tubing for occlusions.
2. Check the cuff connection.
3. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
433
434
SELF TEST PROBLEM
THE SAFETY SYSTEM FAILED THE SELF TEST.
1. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
435 SELF TEST PROBLEM
THE LINE SENSOR OUTPUT IS TOO LOW.
1. Remove tubing from Line Sensor.
2. Check Line Sensor for contamination.
3. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
436 SELF TEST PROBLEM
THE LINE SENSOR OUTPUT IS TOO HIGH.
1. Remove tubing from Line Sensor.
2. Check Line Sensor for contamination.
3. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
437
438 SELF TEST PROBLEM
THE SAFETY SYSTEM FAILED THE SELF TEST.
1. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
439
SELF TEST PROBLEM
LOW PRESSURE ERROR AT THE DPM.
1. Turn power OFF, then ON and try again.
NOTE: If problem persists,
call Haemonetics Technical Hot Line.
# Notice Messages Help Messages