P/N 53063-30, Manual revision: B
8-6
Using Data Acquisition Features
Optionally entering certain data
By default, the patient ID and the surgery type should be entered in the
upper right section of the View Data screen display. However, if the techni-
cian has set the option in the utilities menu, the patient ID number and
surgery type may also be entered in a dedicated screen display. This dedi-
cated screen display will appear once the disposable set installation has
been completed but prior to initiating the procedure.
The operator can do this as follows:
"
Press the Start key when the LOAD DISPOSABLE screen display
appears.
This action will display the following information:
Figure 8-4, Example of the Patient ID screen display
At this point the operator has the possibility to:
"
Enter a patient ID number as follows:
!
Use the Select key to highlight the patient ID option and scroll
through the 10 digits of the patient ID.
!
Use the
#
Arrow keys [
!"
] to select each digit from 0 to 9.
"
Press the Select key to choose a surgery type.
"
Enter a patient hematocrit (if the option was set in the utilities menu
as for a patient ID number).
"
Press the Start key to enter the STANDBY state.
$()/&0)#:R
MMMMMMMMMM
A?%=&%4
I%)*,'(&3/.
$()/&0)#<.)
9>\
A&-&.)`
!"
P#&0)&%#$()/&0)#:R"
$%&88#ADE2D#),#6&=/0#'%,.&3?%&"
$ED:FND#:R
