72
Advanced Editor
96-8000 rev R June 2007
Renumber By Tool
Searches for T (tool) codes, highlights all the program code up to the next T code and renumbers the N code (line
numbers) in the program code.
R & - Signs
This menu item will reverse the signs of the numeric values. Press the enter key to start the process and then enter
the axes (e.g. X, Y, Z etc.) that is to change. When using this feature be cautious if your program contains a G10
or G92 (See the G Code section for a description).
Reverse X & Y
This feature will change X address codes in the program to Y address codes and Ys to Xs.
T
HE
I/O M
ENU
Send RS-232
This menu will send program(s) to the RS-232 port. When this menu item is selected, the program list is displayed.
To select a program, cursor to the program number and press the Insert button. A highlighted space will appear
before the program to indicate it has been selected. (Press Insert again to deselect the program). The Delete button
can be used to deselect all selected programs.
To send the selected program(s), press the Write/Enter button. If more than one program or “All” is selected, the
data will be sent with a “%” at the beginning of the stream and a “%” at the end.
Receive RS-232
This menu item will receive program(s) from the RS-232 serial port.
On the List Prog display “ALL” must first be highlighted before using this menu item. Note, “ALL” must be
reselected on the List Prog screen after each file transfer.
Send Disk
This menu item will send program(s) to the floppy disk. When this menu item is selected the program list is
displayed.
To select a program, cursor to the program number and press the Insert button (or enter a file name, Onnnnn, and
press the Write/Enter button). A highlighted space will appear before the program to indicate it has been selected
(Press Insert again to deselect the program). The Delete button can be used to deselect all selected programs.
Receive Disk
This menu item will receive programs from the floppy disk. Type in the filename (Text, e.g. JOB5.NC, or Onnnnn) of
the disk file being received, and press the Enter button.
Disk Directory
This menu item will display the directory of the floppy disk. To select a file, press the up and down arrow buttons or
use the jog handle to scroll through the directory list and press Write/Enter to load a file.
T
HE
F1: H
ELP
M
ENU
How To Use The Editor
The help is displayed whenever a menu is accessed. The help menu gives a brief description of the editor and its
features. The up and down arrows and the jog handle control the menus, and the Page Up, Page Down Home and
End buttons are used to scroll through the help display. In addition, if the F1 button is pressed during the use of
one of the menu options, the help is likewise displayed. Pressing F1 again will exit the help display. Pressing the
Undo button returns to the active program.
Содержание Mill
