manualshive.com logo in svg

Haas Mill, Руководство оператора

"Haas Mill" - операторская инструкция, которую вы можете бесплатно скачать с нашего сайта. Этот руководство поможет вам освоить все функции и возможности вашего Haas Mill. Необходимо скачать операторский мануал с manualshive.com и начать использовать его прямо сейчас.

Поделиться
Скачать
background image

Settings

1 8 4

96-8000 rev R June 2007

78 5th axis Enable

When this setting is OFF, the fifth axis is disabled and no commands can be sent to that axis. In order to change
this setting the Emergency Stop button must be pressed. See setting 30 for 4th axis. Note that there are two
selections “USER1” and “USER2” that can be used to set-up a unique rotary table.

79 5th-axis Diameter

This is used to set the diameter of the B-axis (0.0 to 50 inches), which the control will use to determine the angular
feedrate. The feedrate in a program is always inches per minute (or mm per minute), therefore, the control must
know the diameter of the part being machined in the B-axis in order to compute angular feedrate. See setting 34 for
4th axis diameter.

80 Mirror Image B-axis

This is an On/Off setting. When it is OFF, axis motions occur normally. When it is on, B axis motion may be
mirrored (or reversed) around the work zero point. Also see settings 45-48 and G101.

81 Tool At Power Up

When the Power Up/Restart key is pressed, the control will change to the tool specified in this setting. If zero (0) is
specified, no tool change occurs at power up. The default setting is 1.

Setting 81, will cause one of the following actions to occur during a Power-up/Restart:

A. If Setting 81 is set to zero, the carousel will be rotated to pocket #1. No tool change will be
performed.

B. If Setting 81 contains the tool number of the tool currently in the spindle, the carousel will remain at
the same pocket and no tool change will be performed.

C. If Setting 81 contains the tool number of a tool not currently in the spindle, the carousel will be
rotated to pocket #1 and then to the pocket containing the tool specified by Setting 81. A tool change
will be performed to change the specified tool into the spindle.

82 Language

Languages other than English are available in the Haas control. To change to another language, choose a language
and press Enter.

83 M30 Resets Override

When this setting is ON, an M30 will restore any overrides (feedrate, spindle, rapid) to their default values (100%).

84 Tool Overload Action

This setting causes the specified action (Alarm, Feedhold, Beep, Autofeed) to occur anytime a tool becomes
overloaded. (See the Tool Set up section)

Choosing “Alarm” will cause the machine to stop when the tool is overloaded.

When set to “Feedhold”, the message “Tool Overload” will be displayed and the machine will stop in a feedhold
situation when this condition occurs. Pressing any key will clear the message.

Selecting “Beep” will cause an audible noise (beep) from the control when the tool is overloaded.

When set to “Autofeed”, the mill automatically limits the feedrate based on the tool load.

Autofeed Notes:

When tapping (rigid or floating), the feed and spindle overrides will be locked out, so the
Autofeed feature will be ineffective (the control will appear to respond to the override buttons, by
displaying the override messages).

The Autofeed feature should not be used when thread milling or auto reversing tapping heads,
as it may cause unpredictable results or even a crash.

The last commanded feedrate would be restored at the end of the program execution, or when
the operator presses Reset or turns off the Autofeed feature.

Содержание Mill


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mill

Vector 0 User'S Manual & Warranty Information preview
0
Бренд: Vector Страницы: 6
National Flooring Equipment 7700 Operating Manual preview
7700
Бренд: National Flooring Equipment Страницы: 23
Gage Bilt GB108 Original Instructions Manual preview
GB108
Бренд: Gage Bilt Страницы: 16
Akyga AK-ND-71 User Manual preview
AK-ND-71
Бренд: Akyga Страницы: 4
Hakko Electronics FR400-53 Instruction Manual preview
FR400-53
Бренд: Hakko Electronics Страницы: 36
Hafco PD-22 Instruction Manual preview
PD-22
Бренд: Hafco Страницы: 27
Malibu Boats 8100-9045-01 Instructions preview
8100-9045-01
Бренд: Malibu Boats Страницы: 4
King Canada KC-116C/FC Service Manual preview
KC-116C/FC
Бренд: King Canada Страницы: 5
Geberit ECO 201 Operation Manual preview
ECO 201
Бренд: Geberit Страницы: 466
New Trent IMP70D User Manual preview
IMP70D
Бренд: New Trent Страницы: 2
Intec Controls I-PS24 Installation & Operation Instructions preview
I-PS24
Бренд: Intec Controls Страницы: 3
Lambda Electronics LDS-Y-01 Instruction Manual preview
LDS-Y-01
Бренд: Lambda Electronics Страницы: 22
X-Tronic 4020-PRO-X Instructions Manual preview
4020-PRO-X
Бренд: X-Tronic Страницы: 16
Stanley LaBounty MRP Safety, Operation & Maintenance Instructions preview
LaBounty MRP
Бренд: Stanley Страницы: 24
Thomas&Betts STAKON COMFORT CRIMP ERG4001 Quick Start Manual preview
STAKON COMFORT CRIMP ERG4001
Бренд: Thomas&Betts Страницы: 2
GRAUPNER PRX-4A Operating Manual preview
PRX-4A
Бренд: GRAUPNER Страницы: 16
Hakko Electronics FM-2029 Instruction Manual preview
FM-2029
Бренд: Hakko Electronics Страницы: 8
C-TEC BF562-3 Installation Instructions preview
BF562-3
Бренд: C-TEC Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды