manualshive.com logo in svg

Haas Mill, Руководство оператора

"Haas Mill" - операторская инструкция, которую вы можете бесплатно скачать с нашего сайта. Этот руководство поможет вам освоить все функции и возможности вашего Haas Mill. Необходимо скачать операторский мануал с manualshive.com и начать использовать его прямо сейчас.

Поделиться
Скачать
background image

II

96-8000 rev R June 2007

Table Of Contents

Warranty Registration

Certificate

LIMITED WARRANTY COVERAGE

All new Haas mills are warranted exclusively by the Haas Automation’s ("Manufacturer") limited warranty as follows:

Each Haas CNC machine ("Machine") and its components ("Components") (except those listed below under limits
and exclusions) is warranted against defects in material and workmanship for a period of one (1) year (except
Tooroom Mills and Mini-Mills, which are six (6) months) from the date of purchase, which is the date that a machine
is installed at the end user. The foregoing is a limited warranty and it is the only warranty by manufacturer. Manufac-
turer disclaims all other warranties, express or implied, including but not limited to all warranties of merchantability
and fitness for a particular purpose.

REPAIR OR REPLACEMENT ONLY:

 

MANUFACTURER'S LIABILITY UNDER THIS AGREEMENT SHALL

BE LIMITED TO REPAIRING OR REPLACING, AT THE DISCRETION OF MANUFACTURER, PARTS, OR
COMPONENTS.

An additional warranty extension may be purchased from your authorized Haas distributor.

LIMITS and EXCLUSIONS of WARRANTY

Except as provided above, buyer agrees that all warranties express or implied, as to any matter whatsoever, includ-
ing but not limited to warranties of merchantability and fitness for a particular purpose are excluded.

Components subject to wear during normal use and over time such as paint, window finish and condition, light bulbs,
seals, chip removal system, etc., are excluded from this warranty.

Factory-specified maintenance procedures must be adhered to and re corded in order to maintain this warranty.

This warranty is void if the machine is subjected to mishandling, misuse, neglect, accident, improper installation,
improper maintenance, or improper operation or application, or if the machine was improperly repaired or serviced by
the customer or by an unauthorized service technician. Warranty service or repair service is available from the
authorized Haas distributor.

Without limiting the generality of any of the exclusions or limitations described in other paragraphs, manufacturer's
warranty does not include any warranty that the machine or components will meet buyer's production specifications
or other requirements or that operation of the machine and components will be uninterrupted or error-free. Manufac-
turer assumes no responsibility with respect to the use of the Machine and Components by Buyer, and manufacturer
shall not incur any liability or Seller to Buyer for any failure in design, production, operation, performance or other-
wise of the Machine or Components other than repair or replacement of same as set forth in the Limited Warranty
above. Manufacturer is not responsible for any damage to parts, machines, business premises or other property of
Buyer, or for any other incidental or consequential damages that may be caused by a malfunction of the Machine or
Components.

LIMITATION OF LIABILITY AND DAMAGES:

 

MANUFACTURER IS NOT LIABLE TO BUYER, SELLER

OR ANY CUSTOMER OF BUYER FOR LOSS OF PROFITS, LOST DATA, LOST PRODUCTS, LOSS OF REV-
ENUE, LOSS OF USE, COST OF DOWN TIME, BUSINESS GOOD WILL, OR ANY OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGE, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING OUT OF OR RE-
LATED TO THE MACHINE OR COMPONENTS, OTHER PRODUCTS OR SERVICES PROVIDED BY MANUFAC-
TURER OR SELLER, OR THE FAILURE OF PARTS OR PRODUCTS MADE BY USING THE MACHINE OR COM-
PONENTS, EVEN IF MANUFACTURER OR SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. MANUFACTURER'S LIABILITY FOR DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE
LIMITED TO REPAIR OR REPLACEMENT, AT THE DISCRETION OF MANUFACTURER, OF THE DEFECTIVE
PARTS, COMPONENTS OR MACHINE.

Содержание Mill


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mill

Gallagher M35 Instructions Manual preview
M35
Бренд: Gallagher Страницы: 104
Balcrank Premium Series Operation, Installation, Maintenance And Repair Manual preview
Premium Series
Бренд: Balcrank Страницы: 8
CCS PDS-30 Instruction Manual preview
PDS-30
Бренд: CCS Страницы: 24
P.A. M63PA ATEX Maintenance Handbook preview
M63PA ATEX
Бренд: P.A. Страницы: 32
Rockwell Automation 1606-XLE120E-2 Instruction Manual preview
1606-XLE120E-2
Бренд: Rockwell Automation Страницы: 4
Eastwood 51460 Instruction Manual preview
51460
Бренд: Eastwood Страницы: 20
Gianni WLP-100 Installation Instruction preview
WLP-100
Бренд: Gianni Страницы: 6
Samlexpower SEC-1223 Owner'S Manual preview
SEC-1223
Бренд: Samlexpower Страницы: 24
TP-Link kasa KL430 V1 Quick Start Manual preview
kasa KL430 V1
Бренд: TP-Link Страницы: 59
Performance Tool M567DB Owner'S Manual preview
M567DB
Бренд: Performance Tool Страницы: 4
FDT 77-000 Operation And Maintenance Manual preview
77-000
Бренд: FDT Страницы: 4
Jefferson JEFLUGGUN03 User Manual preview
JEFLUGGUN03
Бренд: Jefferson Страницы: 4
Celltronix 06-CE-PW13000 Instructions For Use Manual preview
06-CE-PW13000
Бренд: Celltronix Страницы: 10
Pepperl+Fuchs KF**-CRG2-1.D Series Manual preview
KF**-CRG2-1.D Series
Бренд: Pepperl+Fuchs Страницы: 38
Rescue BOOSTER PACK 950 Owner'S Manual preview
BOOSTER PACK 950
Бренд: Rescue Страницы: 8
Milwaukee M18 FMT Original Instructions Manual preview
M18 FMT
Бренд: Milwaukee Страницы: 117
VonHaus 3515191 Manual preview
3515191
Бренд: VonHaus Страницы: 10
Sump Saver Mighty Mini Installation Manual & Owner'S Manual preview
Mighty Mini
Бренд: Sump Saver Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды