Haas Mill, Руководство оператора

Страница: 22 / 217

15 Introduction
96-8000 rev R June 2007
Pressing the Setng / Graph key a second time enables Graphics mode. In Graphics mode the user can view
the generated tool path of the program and, if necessary, debug the program before running it (See Graphics
Mode in the Operation section)
Help / Calc (Help / Calculator) - Displays an abbreviated manual. In this on-screen manual there are brief
descriptions of G and M codes, definitions of control features, troubleshooting and maintenance issues.
Pressing Help/ Calc a second time will display the help calculator. Press the Page Down button to scroll
through the calculator pages (see the calculator section).
C
URSOR
K
EYS
Cursor Keys give the user the ability to move to various screens and fields in the control and are used in the
editing of CNC programs.
Home - This button will move the cursor to the top-most item on the screen; in editing, this is the top left block
of the program.
Up / Down Arrows - moves up/down one item, block or field.
Page Up / Down - Used to change displays or move up/down one page when viewing a program.
Left Arrow - Used to select individually editable items when viewing a program; moves cursor to the left. It is
used to scroll through setting selections.
Right Arrow - Used to select individually editable items when viewing a program; moves cursor to the right. It
is used to scroll through setting selections and moves the zoom window right when in graphics mode.
End - This button generally moves the cursor to the bottom-most item on the screen. In editing, this is the last
block of the program.
A
LPHA
K
EYS
The alpha keys allow the user to enter the letters of the alphabet along with some special characters. Some of
the special characters are entered in by first pressing the “Shift” key.
Shift - The shift key provides access to additional characters on the keyboard. The additional characters are
seen in the upper left of some of the alpha and number keys. Pressing Shift and then the character will enter
that character on the data entry line. When entering text, UPPER CASE is the default, to enter lower case
characters, press and hold the Shift key.
When a control has a fifth axis installed, the B axis is selected for jogging by pressing the Shift button and
then the +/-A jog keys.
EOB - This is the End-Of-Block character. It is displayed as a semicolon (;) on the screen and it signifies the
end of a program line.
( ) - Parentheses are used to separate CNC program commands from user comments. They must always be
entered as a pair. Note: Any time an invalid line of code is received through the RS-232 port while receiving a
program, it is added to the program between parenthesis.
/ - The right slash is used in the Block Delete feature and in Macro expressions. If this symbol is the first
symbol in a block and a Block Delete is enabled, then that block is ignored at run time. The symbol is also
used for division (divide by) in macro expressions (see the Macro section).
[ ] - Square brackets are used in macro functions. Macros are an optional software feature (see the Macro
section).