Haas Mill, Руководство оператора

Страница: 50 / 217

43 Operation 96-8000 rev R June 2007
Tool Loading Flowchart
Press POWER UP/RESTART
Wait for Zero Return
Enter Handle
Jog Mode
An y Large or Heav y
tool designations
displa y ed?
Remove Large and/or
Heav y tool
designations b y
scrolling to each “L”
and/or “H” and
pressing SPACE,
WRITE.
Press ORIGIN.
Will y ou need an y
Large or Heav y
tools?
Organize y our tools
according to y our CNC
program. Determine
numerical positions of
Large tools.
Do y ou have
additional large tools
to designate?
Insert Tool into the
spindle.
Press , PAGE UP HOME
to displa y Offset Tool
Length screen.
Jog Z-Axis to set tool offset.
Press . TOOL OFFSET MESUR
Press . NEXT TOOL
Do y ou have additonal
tools to load?
Loading the
Side Mount Tool
Changer
Press OFFSET, END
PAGE DOWN to view
the Tool Pocket Table.
Y
N
Y
N
Scroll to the tool
pocket that will hold
a large tool and press
L, WRITE. (Or press H
for a heav y tool )
Y
N
Y
N
END
Press ORIGIN
(from Power On)
A “Large Tool” has a diameter greater than 3"
for 40-taper mills, or greater than 4" for
50-taper mills.
High-speed Toolchangers: A “Heav y Tool” is a
tool weighing 4 or more pounds.
Do not enter a lower case “h” or lower
case “l”(L) in the tool table.