Haas 96-8000, Руководство оператора

Страница: 82 / 269

73
96-8000 Rev AC
May 2010
Operation
Important: Verify that the rotary table on pallet one is plugged into “Connector
1”, and that the rotary table on pallet two is plugged into “Connector 2”.
Sample Programs
Example #1
A basic pallet change program that loads the next scheduled pallet and runs
the parts program. The following is a sample of the PST, which indicates that
pallet #1 is loaded and pallet #2 is scheduled. Pallet #2 will be loaded next (see
column 2, “Load Order”) and program O06012 will be used to cut parts on that
pallet (see column 5, “Program Number”). The program comment is captured
from the program.
Pallet Schedule Sample Table 1
Pallet
Number
Load
Order
Pallet
Status
Pallet
Usage
Program
Number
Program Comment
1 * Loaded 23 O04990 (Rough and Finish)
2 1 Scheduled 8 O06012 (Cut Slot)
O00001
M50
G188:
M99
O04990
Part Program
M99
O0612
Part Program
M49Q12
M99
(Program Number)
(Change to next pallet after Part Ready Button is pressed)
(Calls the parts program for the loaded pallet)
(Loop to top of main program)
(User’s part program)
(Return from Subroutine)
(User’s Part Program)
Set current pallet status to 12, string defined by operator.
(Return from subroutine)
Description: The first loop through program O00001 will load pallet #2 (M50)
and run program O06012 (G188 selects program from PST for pallet #2). The
PST will then resemble Sample Table 2. The asterisk for pallet #2 in the “Load
Order” column indicates that this pallet is in the mill.
Pallet Schedule Sample Table 1
Pallet
Number
Load
Order
Pallet Status Pallet
Usage
Program
Number
Program Comment
1 0 Completed 23 O04990 (Rough and Finish Tog)
2 1 Loaded 9 O06012 (Cut Slot)
Description: In the next loop through program O00001, the M50 will detect
that no pallets are scheduled. The beacon light will flash green and program
O00001 will pause until the operator schedules a pallet or presses Reset. A
pallet can be scheduled by pressing the Part Ready button.