Haas 96-8000, Руководство оператора

Страница: 126 / 269

117
96-8000 Rev AC
May 2010
Programming
To cancel the lookahead limit, change the command to G103 P0. G103 cannot
be used when cutter compensation is active.
Editing
Improperly structured or improperly placed macro statements will generate an
alarm. Be careful when editing expressions; brackets must be balanced.
The DPRNT[ ] function can be edited much like a comment. It can be deleted,
moved as a whole item, or individual items within the bracket can be edited.
Variable references and format expressions must be altered as a whole entity.
If you wanted to change [24] to [44], place the cursor so that [24] is highlighted,
enter [44] and press the write key. Remember, you can use the jog handle to
maneuver through long DPRNT[ ] expressions.
Addresses with expressions can be somewhat confusing. In this case, the
alphabetic address stands alone. For instance, the following block contains an
address expression in X:
G1 G90 X [COS [90]] Y3.0; CORRECT
Here, the X and brackets stand-alone and are individually editable items. It is
possible, through editing, to delete the entire expression and replace it with a
floating-point constant.
G1 G90 X 0 Y3.0 ;
WRONG
The above block will result in an alarm at runtime. The correct form looks as
follows:
G1 G90 X0 Y3.0; CORRECT
Note that there is no space between the X and the Zero (0). REMEMBER when
you see an alpha character standing alone it is an address expression.
f
anUc
-S
tyle
M
acro
f
eatUreS
n
ot
i
nclUded
i
n
h
aaS
cnc c
ontrol
This section lists the FANUC macro features that are not available on the Haas
control.
M Aliasing Replace G65 Pnnnn with Mnn PROGS 9020-9029.
G66 Modal call in every motion block
G66.1 Modal call in every motion block
G67 Modal cancel
M98 Alaising, T code PROG 9000, VAR
#149, enable bit
M98 Aliasing, S Code PROG 9029, VAR
#147, enable bit
M98 Aliasing, B Code PROG 9028, VAR
#146, enable bit
SKIP/N N=1..9
#3007 Mirror image on flag each axis