Haas 96-8000 Скачать руководство пользователя страница 47

Страница: 47 / 269

96-8000 Rev AC

May 2010

Copying Files

Highlight a file and press “Enter” to select it. A check mark appears next to the

file name.

Navigate to the destination directory with the arrow keys, press “Enter”, and

press F2 to copy the file.
Note that files copied from the control’s memory to a device will have the exten

sion “.NC” appended to the file name. However the name can be changed by

navigating to the destination directory, entering a new name, and then pressing

F2.

Duplicating a File

Press List Prog to access the Device Manager. Select the memory tab. Cur

sor to the program to duplicate, type a new program number (Onnnnn) and

press F2. The highlighted program is duplicated with the new name, and it is

made the active program. To duplicate a file to a different device, cursor to the

program name and press F2 without entering a new file name. A popup menu

lists destination devices. Select a device and press Enter to duplicate the file.

To copy multiple files, press Enter to place a check mark at each file name.

File Naming Convention

File names should be kept to a typical eight-dot-three format. For example:

program1.txt. However, some CAD/CAM programs use “.NC” as a file type rec

ognition, which is acceptable. File names can also be the same as the program

number with no extension, but some PC applications may not recognize the

file.
Files developed in the control will be named with the letter “O” followed by 5

digits. For example, O12345.

Renaming

To change the name of a file in USB or the Hard Drive, highlight the file, type a

new name and press “Alter”.

Deleting

To delete a program file from a device, highlight the file and press Erase Prog.

Delete multiple files by selecting them (press Enter to add a file to the selec

tion and place a check mark next to it; deselect by pressing Enter again), then

press Erase Prog to delete all selected files.

On-Screen Help

On-Screen help is available by pressing “HELP/CALC”. Select functions from

the popup menu and press “Enter” to execute, or use the hot key listed. To exit

the Help screen, press the “Cancel” button to return to the device manager.

RS-232

RS-232 is one way of connecting the Haas CNC control to another computer.

This feature enables the programmer to upload and download programs, set

tings and tool offsets from a PC.

Содержание 96-8000














































































































































































































































































Результаты поиска

Содержание 96-8000

Отзывы:

Похожие инструкции для 96-8000

Бренды по названию

Популярные бренды

Haas 96-8000, Руководство оператора

Результаты поиска

Содержание 96-8000

Отзывы:

Похожие инструкции для 96-8000

Бренды по названию

Популярные бренды