H3C Voice Gateway H3C VG 10-10, Руководство пользователя

Страница: 43 / 52

User Manual
H3C VG 10-10/10-11 Voice Gateway
Chapter 5 Configuration Example
5-3
number.) Meantime, when power is off, the voice gateway switches to the PSTN
network, then you can dial the phone at the PSTN side directly.
II. Network diagram
LINE
GateKeeper
VG A
VG B
1001
PHONE
WAN WAN
PHONE
PC1
LAN
2001
LAN
PC2
LINE
192.168.80.50/24
192.168.10.100/24
192.168.20.100/24
192.168.80.100/24
PBX PBX
Router
PSTN
Figure 5-2 PSTN backs up IP routing
III. Configuration procedure
Step
Configuration
item
Description Type
Configuration on VG A
-
Obtains IP
address
dynamically
(DHCP) Select “Provision -> Interface” in
the navigation bar. Tick “Use
DHCP” to enable the DHCP, so as
to obtain IP address dynamically.
Required
-
Configure the
voice call mode
Select “Provision -> Call Mode” in
the navigation bar. Tick the “Use
GateKeeper Client Mode” in the
configuration items to enable the
GK client function. Then, configure
the following parameters of the GK
client:
Phone Number: 1001
H.323 Gateway ID: gw1001
Master GK IP address:
192.168.80.50
Master GK ID: gkserver
Required
Configuration on VG B
-
Obtains IP
address
dynamically
(DHCP) Select “Provision -> Interface” in
the navigation bar. Tick “Use
DHCP” to enable the DHCP, so as
to obtain IP address dynamically.
Required