User Manual
H3C VG 10-10/10-11 Voice Gateway
Chapter 4 VG Configuration
4-9
Figure 4-7
Modify the password as plain user
4.2.4 Restarting the Voice Gateway
After you modify the parameters or update the version of VG 10-10/10-11, you have to
restart the voice gateway to make your configuration effective. Select “Others -> Reset”
in the navigation bar and click “Reset” button. Then a dialog box will appear, as shown
in Figure 4-8. Click “OK” to restart the system. Figure 4-9 shows the information that
appears during the restarting process. The restarting process ends after approximately
25 seconds, and then the information as shown in Figure 4-10 will appear if the voice
gateway is successfully restarted.
Figure 4-8
Restart the voice gateway